Tired of aggressive products that smell bad or damage your gun?
The Bore Cleaning Foam is a high-performance foam cleaner, perfect for firearms, airsoft and gas. Ammonia-free, alcohol-free, risk-free. Cleans, protects and extends the life of the barrel... in just 10 minutes.
See product on our website🧼 What is Bore Cleaning Foam?
It is a high performance cleaning foam, free of ammonia, toxic fumes or alcohol, that removes carbon, lead, copper and zinc residues from the inside of the barrel in as little as 10 minutes.
The formula works at the nano level, penetrating micro-cracks in the metal and dissolving any encrusted residue. After its action, it leaves a protective anti-rust layer that preserves the barrel ready for the next shot.
Principal technical advantages
✅ Non-flammable
✅ Ammonia- and alcohol-free
✅ Non-ammonia and alcohol-free
✅ Will not damage steel, aluminium, or delicate finishes
✅✅ Will not harm steel, aluminium, or delicate finishes
✅ Compatible with firearms, compressed air and gas
✅Safe to use with firearms, compressed air and gas
✅ Safe for wood, paint, ceramics, rubber and plastics
✅✅ Safe for wood, paint, ceramic, rubber and plastic
✅ Applicator included for precise cleaning
✅✅Safe for wood, paint, ceramic, rubber and plastic
🛠️ Actual cases of use
Here's how to apply it to different parts of the gun. The images we show you are of a complete cleaning carried out on a replica revolver with a disassembled barrel.
1. Bore barrel
.
Apply the foam directly into the bore and leave for 10 minutes. Then remove with a clean patch. See the rifling perfectly defined and free of debris.
2. Rotating Drum / Cylinder
.
Ideal for removing powder residue from cartridge cases. The foam penetrates, dissolves and leaves the drum shiny and operational.
3.
3. Open ejection port
.
Applies to the cartridge outlet and feed guide on semi-automatics. Removes debris that can cause interruptions in the firing cycle.
.
4. Operating rod / lever system
.
Recommended for rifles with Winchester type lever system. Lubricates and protects internal and external moving parts.
5. Slide rails and centre rail
.
Apply foam directly and distribute with a soft brush. Removes metallic residue, carbon and old grease without attacking the metal.
Removes metal residue, carbon and old grease without attacking the metal.
6. Cam pin and moving parts
.
Internal moving parts are essential to the firing cycle. Foam penetrates and cleans without the need for complete disassembly.
Presentations available
.
🧴 Aerosol: 100 ml / 200 ml / 400 ml
🧴 Aerosol: 100 ml / 200 ml / 400 ml
🔧 Including applicator for difficult areas
Express delivery!
🎯 Why use Bore Cleaning Foam?
Because it allows you to use Bore Cleaning Foam?
Because it allows you to clean and protect effortlessly, without toxic odours and without fuss
.
Because it reduces barrel wear and improves shot grouping.
Because it reduces barrel wear and improves shot grouping.
Because it reduces barrel wear and improves shot grouping.
Because it prevents corrosion, especially on weapons that are stored for long periods.
Because it prevents corrosion, especially on weapons that are stored for long periods.
Because it prevents corrosion.
The formula works at the nano level, penetrating micro-cracks in the metal and dissolving any encrusted residue. After its action, it leaves a protective anti-rust layer that preserves the barrel ready for the next shot.
Principal technical advantages
✅ Non-flammable
✅ Ammonia- and alcohol-free
✅ Non-ammonia and alcohol-free
✅ Will not damage steel, aluminium, or delicate finishes
✅✅ Will not harm steel, aluminium, or delicate finishes
✅ Compatible with firearms, compressed air and gas
✅Safe to use with firearms, compressed air and gas
✅ Safe for wood, paint, ceramics, rubber and plastics
✅✅ Safe for wood, paint, ceramic, rubber and plastic
✅ Applicator included for precise cleaning
✅✅Safe for wood, paint, ceramic, rubber and plastic
🛠️ Actual cases of use
Here's how to apply it to different parts of the gun. The images we show you are of a complete cleaning carried out on a replica revolver with a disassembled barrel.
1. Bore barrel
.Apply the foam directly into the bore and leave for 10 minutes. Then remove with a clean patch. See the rifling perfectly defined and free of debris.
2. Rotating Drum / Cylinder
.Ideal for removing powder residue from cartridge cases. The foam penetrates, dissolves and leaves the drum shiny and operational.
3.
3. Open ejection port
.Applies to the cartridge outlet and feed guide on semi-automatics. Removes debris that can cause interruptions in the firing cycle.
.
4. Operating rod / lever system
.Recommended for rifles with Winchester type lever system. Lubricates and protects internal and external moving parts.
5. Slide rails and centre rail
.Apply foam directly and distribute with a soft brush. Removes metallic residue, carbon and old grease without attacking the metal.
Removes metal residue, carbon and old grease without attacking the metal.
6. Cam pin and moving parts
.Internal moving parts are essential to the firing cycle. Foam penetrates and cleans without the need for complete disassembly.
Presentations available
.🧴 Aerosol: 100 ml / 200 ml / 400 ml
🧴 Aerosol: 100 ml / 200 ml / 400 ml
🔧 Including applicator for difficult areas
