Apel Mounts - EAW – German Precision and Stability for your Scope

APEL EAW scope mounts for rifles: German precision for a secure riflescope installation

APEL EAW scope mounts are among the most respected solutions for mounting a riflescope on hunting rifles, bolt-action rifles, semi-automatic rifles and sporting firearms requiring a strong, precise and repeatable connection. In this category you will find APEL scope mounts, bases, rings, rails, front bases, rear bases and pivot mounts designed to properly fit your optic to your rifle.

Choosing the right mount is not only about selecting the ring diameter. You must also consider the exact rifle model, the type of rail or mounting base, the scope tube diameter, the objective bell diameter, the BH height and the intended use: driven hunting, stalking, long-range shooting, thermal optics or night vision setups.

What does BH mean on an APEL EAW mount?

On APEL EAW mounts, the BH specification refers to the mount height measured in millimetres. For example, a BH10 mount has a height of 10 mm, a BH17 mount has a height of 17 mm and a BH20 mount has a height of 20 mm.

• BH5: 5 mm
• BH10: 10 mm
• BH11.5: 11.5 mm
• BH12: 12 mm
• BH14: 14 mm
• BH17: 17 mm
• BH18: 18 mm
• BH19: 19 mm
• BH20: 20 mm

As a general rule, a lower mount height improves cheek weld and keeps the riflescope closer to the bore axis. However, there must still be enough clearance to prevent the objective bell from touching the barrel, sights, rail or receiver.

How to calculate the correct BH height for your riflescope

To choose the correct APEL mount height, both the riflescope and the rifle should be carefully measured. The most important factor is not only the advertised objective size, but the actual external diameter of the objective bell, as the housing usually adds several extra millimetres.

Practical formula:

Minimum required height = external objective radius - available distance between the rail/base and the barrel + safety clearance

The recommended clearance is usually between 1.5 and 3 mm. If you use flip-up covers, thermal clip-ons or additional accessories, leaving extra space is recommended.

Professional measuring tips before buying

• Measure the external diameter of the objective bell with a caliper rather than relying only on the manufacturer's specifications.
• Check the scope tube diameter: 25.4 mm / 1”, 30 mm, 34 mm or 36 mm.
• Identify whether your rifle uses a Picatinny rail, Weaver rail, 11 mm dovetail, 14 mm rail, Zeiss rail, Swarovski rail or dedicated mounting bases.
• Verify the exact rifle model: Remington 700, Tikka T3, Sauer 303, FN BAR, Browning X-Bolt, Mauser, Blaser, Steyr Mannlicher, Benelli Argo, etc.
• Determine whether you need a fixed mount, detachable mount or pivot mount.

How to choose the right APEL EAW mounting system

If you are looking for a high-quality hunting scope mount, APEL EAW pivot mounts are an excellent choice. They allow the riflescope to be quickly removed and reinstalled while maintaining excellent repeatability.

For driven hunting rifles or setups where shooters alternate between a riflescope, red dot sight or open sights, an APEL pivot mount is often the ideal solution. Direct mounts for Picatinny or Weaver rails provide excellent versatility and make optic changes easier.

Differences between Picatinny, Weaver and pivot mounts

Picatinny mounts are extremely popular due to their versatility and compatibility with a wide range of optics and accessories. Weaver mounts are similar, but they are not always fully interchangeable with Picatinny systems.

APEL EAW pivot mounts are designed for hunters and shooters looking for an elegant, precise and repeatable mounting solution. They are especially popular on European hunting rifles.

Common mistakes when choosing a riflescope mount

• Selecting a mount based only on tube diameter and ignoring objective clearance.
• Confusing Picatinny and Weaver standards.
• Choosing a BH height that is too low.
• Selecting a mount that is too high and compromising cheek weld.
• Failing to verify the exact rifle model.
• Ignoring the manufacturer’s recommended torque settings.

Installation tips for APEL EAW mounts

Installing a riflescope mount should always be done carefully. Before final tightening, ensure all parts are correctly aligned, verify proper eye relief and make sure the reticle is perfectly level.

Using a torque wrench is strongly recommended. Insufficient torque may cause zero shift, while excessive torque can damage the scope tube.

Which APEL mount fits my rifle?

To choose the correct APEL mount for your rifle, ask yourself the following questions:

• What is my exact rifle model?
• Does my rifle use a rail or dedicated mounting bases?
• What is my scope tube diameter?
• What is the actual external objective diameter?
• Do I need a fixed, detachable or pivot mounting system?

Advantages of APEL EAW mounts

• German precision manufacturing.
• Excellent compatibility with European and American hunting rifles.
• Mounts available for 1”, 30 mm, 34 mm and 36 mm scopes.
• Pivot mounts, bases, rings and adapters.
• Solutions for Picatinny, Weaver, Zeiss and Swarovski rails.
• Outstanding stability, even on powerful calibres.

Buy APEL EAW scope mounts at Carbin Store

At Carbin Store you will find a specialised selection of APEL EAW riflescope mounts compatible with different rifles, optics and rail systems. Whether you are looking for a 30 mm mount, 34 mm rings, a pivot mount or a dedicated mounting base, always verify measurements and compatibility before purchasing.

A high-quality mount is an essential part of the rifle and optic combination. Choosing the correct system improves shooting comfort, precision and long-term reliability in the field.