Features ZASDAR PCP 3 STAGES PUMP

Zasdar 3-stage manual pump for PCP 310 bar

The Zasdar 3-stage hand pump for PCP tanks is a practical solution for filling PCP tanks without relying on an electric compressor. It offers a maximum indicated pressure of 310 bar / 4500 PSI / 30 MPa and uses a three-stage compression system to progressively increase air pressure.

Made of stainless steel , it incorporates a filtration system, a hose with an air filter, and a Foster quick-connect fitting . It also comes with 1/8" male and female Foster adapters, providing a complete setup for compatible PCP equipment.

What does it mean for a PCP pump to be 3-stage?

A 3-stage PCP pump uses several internal compression chambers that work sequentially. Instead of trying to reach high pressure in a single stage, the air is compressed progressively through the different stages.

This design allows the generation of the high pressures necessary to manually and progressively fill PCP tanks .

Maximum pressure of 310 bar and 4500 PSI

The Zasdar hand pump achieves a maximum indicated pressure of 310 bar , equivalent to approximately 4500 PSI or 30 MPa .

This capacity allows it to be used with numerous compatible PCP tanks and equipment, always respecting the maximum filling pressure indicated by the equipment manufacturer .

The maximum pressure a pump can generate should not be confused with the pressure at which a specific PCP should be charged. If, for example, the manufacturer specifies a lower maximum pressure, that limit must always be respected.

3-stage compression system

The three stages allow for progressive air compression. Each stage increases the pressure before transferring the air to the next, until the pressure required for loading is reached.

This system is specially designed to work with the high pressures commonly used in PCP rifles and pistols .

Integrated air filtration

The pump incorporates air filtration , an important element within a system intended to introduce high-pressure air into a PCP tank.

In addition, the set includes a hose equipped with an air filter , completing the connection system between the pump and the compatible equipment.

Foster Quick Connector

The Zasdar PCP pump incorporates a Foster-type quick connector , a system widely used in pre-compressed air equipment.

This connection facilitates coupling with compatible PCP systems and allows for convenient connection and disconnection operations.

Includes 1/8" Foster adapters

The kit is supplied with a 1/8" male and female Foster adapter , expanding the connection possibilities with different compatible charging systems.

Before using the pump, it is advisable to check what type of charging connector the PCP uses and verify that all components are compatible and correctly installed.

Stainless steel construction

The pump is made of stainless steel and has a total approximate weight of 2.5 kg .

Its construction is designed to withstand the demands of a manual system that works with high-pressure air, providing a reusable solution for PCP equipment users.

An alternative to the PCP compressor

One of the main advantages of a manual PCP pump is that it allows filling without electricity or a compressor.

This makes it a particularly interesting solution for users who want a self-contained charging system that is easy to transport and ready to use when needed.

For what PCP do we recommend this Zasdar pump?

The Zasdar 3-stage pump can be used to charge compatible PCP equipment whose working pressure is within its specifications.

Before carrying out any filling, it is essential to check the maximum pressure allowed by the tank and not exceed it under any circumstances.

Features of the Zasdar PCP hand pump

• Brand: Zasdar.
• Type: Hand pump for PCP.
• System: 3 compression stages.
• Maximum pressure: 310 bar.
• Maximum pressure in PSI: 4500 PSI.
• Maximum pressure: 30 MPa.
• Material: stainless steel.
• Total weight: about 2.5 kg.
• Filtration: air filtration system.
• Hose: included with air filter.
• Connection: Foster quick connector.
• Adapters: Foster male and female 1/8".
• Use: Manual filling of compatible PCP tanks.

Advantages of the Zasdar 3-stage PCP pump

• It allows reaching up to 310 bar / 4500 PSI .
• Progressive compression using 3 stages .
• It does not require an electrical connection.
• Stainless steel construction.
• It incorporates air filtration.
• Includes hose with filter.
• Foster quick connector.
• 1/8" male and female Foster adapters included.

Zasdar PCP hand pump at Carbin Store

Find the Zasdar PCP 3-stage hand pump at Carbin Store , capable of reaching up to 310 bar and equipped with a filtration system, hose, Foster quick connection and 1/8" adapters.

A practical solution for those looking for a manual PCP charging system without relying on an electric compressor.