Optik Arms Scope Mounts for Hunting and Target Shooting

Optik Arms Scope Mounts: Precision Rings, Bases and Rails

Optik Arms scope mounts include rings, bases, Picatinny rails and quick-detach systems for hunting rifles and target-shooting platforms. These components are designed to create a secure connection between the firearm and the optic while maintaining correct alignment and a stable point of impact under recoil.

This category includes fixed and detachable mounts, rings for different riflescope tube diameters, one-piece mounts, rails and bases for specific rifle models. To compare Optik Arms with other manufacturers and mounting systems, browse our complete selection of scope mounts, rings, bases and rails.

Optik Arms Manufacturing and Technical Features

Optik Arms manufactures its mounting components through precision machining from selected solid materials. Depending on the product, aluminium alloys or steel may be used together with surface treatments intended to reduce wear and corrosion.

• Precision machining: controlled tolerances and consistent contact surfaces for a secure installation.
• Durable materials: components designed to withstand recoil and the demands of regular use.
• Protective finishes: surface treatments selected to reduce corrosion and wear, depending on the model.
• Different mounting systems: fixed rings, quick-detach rings, one-piece mounts, bases and Picatinny rails.
• Manufacturer’s warranty: Optik Arms advertises a lifetime warranty, subject to the manufacturer’s applicable terms and exclusions.

Compatibility is not universal. Every mount must match the exact rifle model, mounting interface, riflescope tube diameter, required height and complete optic configuration.

Which Optik Arms Mount Do You Need?

Optik Arms Rings for 30 mm, 34 mm and 40 mm Tubes

The range includes Optik Arms scope rings for different main tube diameters, including 30 mm, 34 mm and, on selected models, 40 mm. The internal diameter of the rings must match the riflescope tube exactly.

Scope tube diameter must not be confused with objective lens diameter. A riflescope with a 30 mm main tube may have a much larger objective housing. The objective housing affects the minimum mounting height, but it does not determine the ring diameter.

Fixed or Detachable Optik Arms Mount?

Fixed scope rings are suitable for configurations in which the riflescope will remain permanently installed on the rifle. They provide a straightforward and stable solution when the correct tube diameter, mounting height and rail system have been selected.

QR and Quick-Click mounts are useful when the optic needs to be removed for transport, maintenance or replacement with another sighting system. Actual return-to-zero performance depends on correct installation, clamping adjustment, the condition of the contact surfaces and full compatibility between all components.

After removing and refitting a riflescope, always check the rifle’s zero and point of impact before using it for hunting or target shooting.

Picatinny and Weaver Rail Compatibility

Picatinny and Weaver rails share a similar cross-slot design, but their dimensions are not always identical. A Weaver mount should not automatically be assumed to fit every Picatinny rail, or vice versa.

Check the width and position of the cross slots, the dimensions of the recoil lug and the manufacturer’s compatibility information. The recoil lug must engage correctly with the selected slot to prevent the mount from moving along the rail under recoil.

What Does BH Mean on an Optik Arms Mount?

The abbreviation BH is used to identify the construction or mounting height of a mount. Optik Arms references may include designations such as BH6, BH9, BH10, BH15, BH17, BH20 or BH25.

These values distinguish different heights within a product family. However, the exact points used to measure BH may vary depending on the design of the mount.

A BH number should therefore not be interpreted as a universal distance between the rail and the riflescope’s centreline without checking the technical drawing or complete dimensions. This is particularly important when clearance between the objective housing, barrel, receiver or iron sights is limited.

How to Determine the Correct Mounting Height

Mounting a riflescope as low as practical generally supports a more natural shooting position and a better cheek weld. However, sufficient clearance must remain between the objective housing and the barrel, receiver, rail or iron sights.

When choosing the mounting height, consider:

• the actual outside diameter of the objective housing;
• the riflescope main tube diameter;
• the height of the existing base or rail;
• the barrel profile and receiver geometry;
• any existing front or rear iron sights;
• flip-up lens covers, thermal clip-ons or other accessories;
• the stock design and the required cheek weld.

For further information about tube diameters, rails and mounting height, read our guide to choosing scope mounts, rings and rails.

Optik Arms Picatinny Rails

Optik Arms offers Picatinny rails for different rifles and receiver configurations. A rifle-specific rail provides a consistent mounting interface for compatible rings, one-piece mounts and other optical sights.

Before purchasing, confirm the exact rifle model, action length, mounting-hole pattern and attachment method. A rifle family name may not be sufficient because different variants can use different receivers or mounting arrangements.

Some rails may be available with a stated cant. A rail with MOA cant can increase the usable elevation adjustment range of a riflescope for longer-distance shooting. Choose a canted rail only when this feature is clearly specified for the exact product and is appropriate for the rifle, optic and intended shooting distance.

One-Piece and Tactical Optik Arms Mounts

A one-piece mount connects both rings through a common mounting body. This design can provide increased rigidity and is frequently used on target rifles and certain tactical configurations.

In addition to the tube diameter and mounting height, check the distance between the rings, the available straight section of the riflescope tube, turret position and required eye relief. A strong mount is not suitable if it prevents the optic from being positioned correctly.

Rifle-Specific Bases and Special Configurations

In addition to more versatile rail systems, the Optik Arms range includes bases for particular firearms, including products intended for the BRNO ZK99. With this type of product, the complete model designation must match the firearm exactly.

Also check the year of manufacture, model variant, action length and available mounting points. A base must never be selected solely because the firearm name appears similar, nor should it be modified to force an installation.

Installation and Correct Torque Settings

Even a high-quality scope mount can only perform correctly when it is installed properly. Always work with an unloaded firearm, use suitable tools and follow the torque values specified for the exact product.

1. Confirm compatibility between the firearm, rail, rings and riflescope.
2. Clean and inspect all contact surfaces.
3. Install the base or rail according to the manufacturer’s instructions.
4. Position the rings without fully tightening them.
5. Set the correct eye relief and longitudinal scope position.
6. Level the reticle accurately.
7. Tighten the screws gradually and evenly to the stated torque.
8. Check bolt operation and clearance around the objective and controls.
9. Zero the rifle and confirm the point of impact.

Excessive torque can mark or deform the riflescope tube. Insufficient torque may allow the mount to move and cause a shift in the point of impact.

How to Choose the Correct Optik Arms Mount

1. Identify the rifle: manufacturer, exact model, version and receiver drilling.
2. Check the interface: Picatinny rail, Weaver rail, rifle-specific base or another system.
3. Measure the tube: for example, 30 mm, 34 mm or 40 mm.
4. Determine the height: consider the objective housing, base height and required clearance.
5. Choose the mount type: fixed rings, QR, Quick-Click or a one-piece mount.
6. Check the exact reference: compare the technical drawing, dimensions and compatibility information.